AP562 Datasheet | WJ Communications

Product Features - 3.3 - 3.8 GHz - +39 d Bm P1d B .. - 12 d B Gain 3.3-3.8 GHz Wi MAX 8W Power Amplifier Product Description The AP562 is a high dynamic range broadband power amplifier in a surface mount package. The single-stage amplifier has 12 d B gain, while being able to achieve high performance for 3.3- 3.8 GHz Wi MAX applications with up to 39 d Bm of pressed 1d B power. The AP562 uses a high reliability +12V In Ga P/Ga As HBT process technology. The device incorporates proprietary bias circuitry to pensate for variations in linearity and current draw over temperature. The device does not require any negative bias voltage; an internal active bias allows the AP562 to operate directly off a monly used +12V supply and has the added feature of a +5V power down control pin. Ro HS-pliant 5x6mm DFN package is surface mountable to allow for low manufacturing costs to the end user. The AP562 is targeted for use in a balanced or single ended configuration for Wi MAX applications where high linearity and high power is required. Functional Diagram - 2% EVM @ 30 d Bm Pout - +12 V Supply Voltage - Lead-free/Ro HS-pliant 5x6 mm power DFN package Applications - Wi MAX CPE/BTS Specifications Parameter Operational Bandwidth Output Channel Power Power Gain Input Return Loss Output Return Loss Error Vector Magnitude Operating Current, Icc Collector Efficiency Output P1d B Quiescent Current, Icq Vpd(4) Vcc, Vbias Units Min MHz d Bm d B d B d B % m A % d Bm m A V V 3300 Typ +30 12 14 6.8 1.9 627 13 +39 400 +5 +12 Max Notes: 1. Test conditions unless otherwise noted: T = 25ºC, Vpd = +5V, Vbias = Vcc = +12, Icq = 400m A at Pout = +30 d Bm and f = 2.6 GHz. 2. Using an 802.16-2004 OFDMA, 64QAM-1/2,1024-FFT, 20 symbols, 30 subchannels signal. 3. Switching speed: 50% TTL to 100/0% RF. 4. Vpd used for device power down. (low=RF off) 5. Capable of handling 10:1 VSWR @ 12 VDC, 2.3-2.9 GHz, Pout = 30d...