Datasheet4U Logo Datasheet4U.com

WD3124DA - 1000mA Buck/Boost Charge Pump Flash LED Driver

Datasheet Summary

Description

The WD3124DA is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications.

The charge pump can be set to regulate two current levels for FLASH and TORCH modes.

Features

  • a very low shutdown current, an automatic soft-start mode to limit inrush current, as well as over current, over voltage and over-Thermal shutdown control. A low current sense reference voltage (50mV) allows the use of small 0603 current sensing resistors. The WD3124DA is available.

📥 Download Datasheet

Datasheet preview – WD3124DA

Datasheet Details

Part number WD3124DA
Manufacturer WillSEMI
File Size 668.58 KB
Description 1000mA Buck/Boost Charge Pump Flash LED Driver
Datasheet download datasheet WD3124DA Datasheet
Additional preview pages of the WD3124DA datasheet.

📁 Similar Datasheet

  • WD3124DB - 1000mA Buck/Boost Charge Pump Flash LED Driver (Will Semiconductor)
  • WD300 - (WD Series) DC/DC Converters (XPIQ)
  • WD301 - (WD Series) DC/DC Converters (XPIQ)
  • WD302 - (WD Series) DC/DC Converters (XPIQ)
  • WD303 - (WD Series) DC/DC Converters (XPIQ)
  • WD304 - (WD Series) DC/DC Converters (XPIQ)
  • WD305 - (WD Series) DC/DC Converters (XPIQ)
  • WD306 - (WD Series) DC/DC Converters (XPIQ)
  • WD33C92 - (WD33C93) SCSI Bus Interface Controller (Western Digital)
  • WD33C93A - SCSI Bus Interface Controller (Western Digital)
Other Datasheets by WillSEMI
  • WD3120 - Boost Converter
  • WD3126 - Boost Converter
  • WD3100 - 200mA Flash/Torch LED Driver
  • WD3131 - 26V Step-Up White LED Driver
  • WD3132 - 38V Step-Up White LED Driver
  • WD3133 - 1.2-MHz DC-DC STEP-UP CONVERTERS
  • WD3138 - White LED Driver
  • WD3139 - 38V Step-Up White LED Driver

Full PDF Text Transcription

Click to expand full text
WD3124DA 1000mA Buck/Boost Charge Pump Flash LED Driver WD3124DA Http//:www.sh-willsemi.com Description The WD3124DA is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH and TORCH modes. The WD3124DA automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. It switches at 2.2MHz, allowing the use of tiny components. The supply voltage ranges from 2.7V to 5.5V and is ideally suited for all applications powered by a single LI-Ion battery cell or three to four NiCd, NiMH, or Alkaline battery cells.
Published: |