Datasheet4U Logo Datasheet4U.com

WD3168 - 5V/300mA Charge Pump Device

Description

The WD3168 is a switched capacitor voltage converter which produces a regulated, low noise, and low-ripple output voltage (5V) from an unregulated input voltage.

It maintains 5V regulation even when VIN is greater than 5V.

The 5V output can supply a maximum of 300mA current with a small package.

Features

  • Output Current up t.

📥 Download Datasheet

Datasheet preview – WD3168

Datasheet Details

Part number WD3168
Manufacturer WillSEMI
File Size 695.77 KB
Description 5V/300mA Charge Pump Device
Datasheet download datasheet WD3168 Datasheet
Additional preview pages of the WD3168 datasheet.

📁 Similar Datasheet

  • WD3124DB - 1000mA Buck/Boost Charge Pump Flash LED Driver (Will Semiconductor)
  • WD300 - (WD Series) DC/DC Converters (XPIQ)
  • WD301 - (WD Series) DC/DC Converters (XPIQ)
  • WD302 - (WD Series) DC/DC Converters (XPIQ)
  • WD303 - (WD Series) DC/DC Converters (XPIQ)
  • WD304 - (WD Series) DC/DC Converters (XPIQ)
  • WD305 - (WD Series) DC/DC Converters (XPIQ)
  • WD306 - (WD Series) DC/DC Converters (XPIQ)
  • WD33C92 - (WD33C93) SCSI Bus Interface Controller (Western Digital)
  • WD33C93A - SCSI Bus Interface Controller (Western Digital)
Other Datasheets by WillSEMI
  • WD3100 - 200mA Flash/Torch LED Driver
  • WD3120 - Boost Converter
  • WD3124DA - 1000mA Buck/Boost Charge Pump Flash LED Driver
  • WD3126 - Boost Converter
  • WD3131 - 26V Step-Up White LED Driver
  • WD3132 - 38V Step-Up White LED Driver
  • WD3133 - 1.2-MHz DC-DC STEP-UP CONVERTERS
  • WD3138 - White LED Driver

Full PDF Text Transcription

Click to expand full text
WD3168 5V/300mA Charge Pump Device WD3168 Http//:www.sh-willsemi.com Descriptions The WD3168 is a switched capacitor voltage converter which produces a regulated, low noise, and low-ripple output voltage (5V) from an unregulated input voltage. It maintains 5V regulation even when VIN is greater than 5V. The 5V output can supply a maximum of 300mA current with a small package. WD3168 operates in skip-mode when the load current falls below 4mA under typical condition. In skip-mode operation, quiescent current is reduced to 170uA.Only 3 external capacitors are needed to generate output voltage, thereby saving PCB space. Inrush current is limited by the soft start function during power on and power transient states.
Published: |