Datasheet4U Logo Datasheet4U.com

WS4518E - Single Li-ion Battery Charger

Datasheet Summary

Description

The WS4518E is a complete constant-current / constant voltage linear charger for single cell Lithium-Ion batteries.

No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture.

📥 Download Datasheet

Datasheet preview – WS4518E

Datasheet Details

Part number WS4518E
Manufacturer WillSEMI
File Size 280.82 KB
Description Single Li-ion Battery Charger
Datasheet download datasheet WS4518E Datasheet
Additional preview pages of the WS4518E datasheet.

📁 Similar Datasheet

  • WS45P4SMA - Power Transient Voltage Suppressor (WAYON)
  • WS45P4SMA-B - Power Transient Voltage Suppressor (WAYON)
  • WS45P6SMB - Power Transient Voltage Suppressor (WAYON)
  • WS45P6SMB-B - Power Transient Voltage Suppressor (WAYON)
  • WS4.5D3HP - Transient Voltage Suppressor (WAYON)
  • WS400P4SMA - Power Transient Voltage Suppressor (WAYON)
  • WS400P4SMA-B - Power Transient Voltage Suppressor (WAYON)
  • WS40P4SMA - Power Transient Voltage Suppressor (WAYON)
  • WS40P4SMA-B - Power Transient Voltage Suppressor (WAYON)
  • WS40P6SMB - Power Transient Voltage Suppressor (WAYON)
Other Datasheets by WillSEMI
  • WS4518D - Single Li-ion Battery Charger
  • WS4508E - Single Li-ion Battery Charger
  • WS4508S - Single Li-ion Battery Charger
  • WS4601 - Power Distribution Switch
  • WS4603 - Power Distribution Switch
  • WS4611 - Power Distribution Switch
  • WS4620H - Adjusted Current Limit Over-Voltage Protection Load Switch
  • WS4639 - Configurable Reset Timer

Full PDF Text Transcription

Click to expand full text
WS4518E 300mA, Single Li-ion Battery Charger WS4518E www.sh-willsemi.com Descriptions The WS4518E is a complete constant-current / constant voltage linear charger for single cell Lithium-Ion batteries. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The WS4518E automatically terminates the charge cycle when the charge current drops to 3/10 the programmed value after the final float voltage is reached.
Published: |