WS337L Datasheet | Wing Shing Computer Components

3-TERMINAL ADJUSTABLE REGULATORS General description The WS337L is an adjustable 3-terminal negative voltage regulator capable of supplying 100m A over a 1.2V to 37V output range. It is exceptionally easy to use and requires only two external resistors to set the output voltage. Furthermore, both line and load regulation are better than standard fixed regulators, Also, the WS337L is packaged in a standard TO-92 transistor package which is easy to use. In addition to higher performance than fixed regulators, the WS337L offers full overload protection. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected. Normally, only a single 1 μF solid tantalum output capacitor is needed unless the device is situated more than 6 inches from the input filter capacitors, in which case an input bypass is needed. A larger output capacitor can be added to improve transient response, the adjustment terminal can be bypassed to achieve very high ripple rejection ratios which are difficult to achieve with standard 3-terminal regulators. Besides replacing fixed regulators, the WS337L is useful in a wide variety of other applications. Since the regulator is “floating” and sees only the input-to-output differential is not exceeded. Also, it makes an especially simple adjustable switching regulator, a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the WS337L can be used as a precision current regulator. Supplies with electronic shutdown can be achieved by clamping the adjustment terminal to ground that program the output to 1.2V where most loads draw little current. The WS337L is available in a standard TO-92 transistor package and a SO-8 surface mount package. The WS337 is rated for operation over a 0℃ to + 70℃ range. Features - - - - - - - - Adjustable output down to 1.2V Guaranteed...