Winson WCS2800
The WCS2800 consists of a precise, low-temperature drift linear hall sensor IC with temperature compensation circuit and a 14X10mm 2 through hole. This design allow system designers to monitor any current path without breaking or changing original system layout at all. The terminals of the conductive path are electrically isolated from the sensor leads.| Part No. | WCS2800 |
|---|---|
| Datasheet | WCS2800 Download |
| Manufacturer |  Winson |
| Description | Hall Effect Base Linear Current Sensor |
| Buy | Stock & Price |
FEATURES
:● 14X10mm 2 current conductor through hole
● Output voltage proportional to AC and DC current
● Wide sensing current range 0~35 A at 5V volt
● High sensitivity 72 mV/A
● Wide operating voltage range 3.0~12V
● Low operating current 3 mA
● Isolation voltage 4000 V
● Ratiometric output from supply voltage
● 23K Hz Bandwidth
● Two bronze sticks for easy soldering on PCB Functional
DESCRIPTION
: The Winson WCS2800 current sensor provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package provides easy implementation without breaking original system and make current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc… Users can use system’s own electric wire by pass it through this hole to measure passing current. Any current flowing through this hole will generate a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage.
