Datasheet4U Logo Datasheet4U.com

WM2604 - Quad 10-Bit Serial Input Voltage Output DAC

General Description

The WM2604 is a quadruple 10-bit voltage output, resistor string, digital-to-analogue converter.

Each DAC can be individually powered down under software control.

A hardware controlled mode is provided that powers down all DACs.

Key Features

  • Four 10-bit voltage output DACs Dual 2.7V to 5.5V supply (separate digital and analogue supplies) DNL ± 0.1 LSB, INL ± 0.4 LSB Low power consumption: - 5.5mW, slow mode - 5V supply - 3.3mW, slow mode - 3V supply TMS320, (Q)SPI™ , and Microwire™ compatible serial interface Programmable settling time of 4µ s or 12µ s typical.

📥 Download Datasheet

Datasheet Details

Part number WM2604
Manufacturer Wolfson Microelectronics plc
File Size 103.93 KB
Description Quad 10-Bit Serial Input Voltage Output DAC
Datasheet download datasheet WM2604 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WM201-RTL8723-1 11b/g/n WLAN and Bluetooth v2.1 / 3.0 / 4.0 single chip solution Winsonic
WM2130 10-BIT 30MSPS ANALOGUE- TO - DIGITAL CONVERTER Wolfson Microelectronics

Other Datasheets by Wolfson Microelectronics plc

Part Number Description
WM2608 Octal 10-bit/ Serial Input/ Voltage Output DAC with Power Down
WM2610 Octal 12-bit/ Serial Input/ Voltage Output DAC with Power Down
WM2613 Byte-wide Parallel Input/ 12-bit Voltage Output DAC
WM2614 Quad 12-bit Serial Input Voltage Output DAC
WM2616 12-bit Serial Input Voltage Output DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WM2604 Quad 10-Bit Serial Input Voltage Output DAC Production Data, June 1999, Rev 1.0 FEATURES • • • • Four 10-bit voltage output DACs Dual 2.7V to 5.5V supply (separate digital and analogue supplies) DNL ± 0.1 LSB, INL ± 0.4 LSB Low power consumption: - 5.5mW, slow mode - 5V supply - 3.3mW, slow mode - 3V supply TMS320, (Q)SPI™ , and Microwire™ compatible serial interface Programmable settling time of 4µ s or 12µ s typical DESCRIPTION The WM2604 is a quadruple 10-bit voltage output, resistor string, digital-to-analogue converter. Each DAC can be individually powered down under software control. A hardware controlled mode is provided that powers down all DACs. Power down reduces current consumption to 10nA.