Datasheet4U Logo Datasheet4U.com

WM8143-10 - 10-bit/6MSPS CCD Signal Processor

General Description

The WM8143-10 integrates the analogue signal conditioning required by CCD sensors with a 10-bit ADC.

The WM8143-10 requires minimal external circuitry and provides a cost-effective sensor to digital domain system solution.

Key Features

  • can be optionally bypassed. The device configuration is programmed either via a simple serial interface or via an eight-bit parallel interface. The serial/parallel interfaces of the WM8143-10 are control compatible with those of the WM8144-10 and WM8144-12. Features.
  • Reset level clamp Correlated double sampling (CDS) Fine offset level shifting Programmable gain amplification 10-bit ADC with maximu.

📥 Download Datasheet

Datasheet Details

Part number WM8143-10
Manufacturer Wolfson Microelectronics plc
File Size 492.00 KB
Description 10-bit/6MSPS CCD Signal Processor
Datasheet download datasheet WM8143-10 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WM8144-12 Integrated 12-bit Data Acquisition System Wolfson Microelectronics
WM8152 Single Channel 16-bit CIS/CCD AFE Wolfson Microelectronics
WM8195 14-bit 12MSPS CIS/CCD Analogue Front End/Digitiser Wolfson Microelectronics
WM8196 (8 + 8) Bit Output 16-bit CIS/CCD AFE/Digitiser Wolfson Microelectronics
WM8199 20MSPS 16-bit CCD Digitiser Cirrus Logic

Other Datasheets by Wolfson Microelectronics plc

Part Number Description
WM8143-12 12-bit/4MSPS CCD Signal Processor
WM8141 12-bit 6MSPS CIS/CCD Analogue Front End/Digitiser
WM8144-10 Integrated 10-bit Data Acquisition system for Imaging Applications
WM8146 12-bit(8+4-bit) Linear Sensor Image Processor
WM8148 12-bit/12MSPS CCD/CIS Analogue Front End/Digitiser

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WM8143-10 10-bit/6MSPS CCD Signal Processor Production Data June 1998 Rev 3f Description The WM8143-10 integrates the analogue signal conditioning required by CCD sensors with a 10-bit ADC. The WM8143-10 requires minimal external circuitry and provides a cost-effective sensor to digital domain system solution. Each of the three analogue conditioning channels includes reset level clamp, CDS, fine offset level shifting and programmable gain amplification. The three channels are multiplexed into the ADC. The output from the ADC is fed to the output bus pins OP[9:0] via a 10/8 bit multiplexer, enabled by the OEB signal. The flexible output architecture allows ten-bit data to be accessed either on a ten-bit bus or via a time-multiplexed eight-bit bus.