Datasheet4U Logo Datasheet4U.com

WM8533 - 24-bit 192kHz Stereo DAC

General Description

The WM8533 is a stereo DAC with integral charge pump and software control interface.

This provides 2Vrms line driver outputs using a 3.3V power supply rail.

Key Features

  • ground-referenced outputs and the use of a DC servo to eliminate the need for line driving coupling capacitors and effectively eliminate power on pops and clicks. The device is controlled and configured either via the I2C/SPI compliant serial control interface or a hardware control interface. The device supports all common audio sampling rates between 8kHz and 192kHz using all common MCLK / fs ratios. Master and slave modes are available and deemphasis is also supported. The WM8533 has a 1.8 to.

📥 Download Datasheet

Datasheet Details

Part number WM8533
Manufacturer Wolfson Microelectronics
File Size 727.33 KB
Description 24-bit 192kHz Stereo DAC
Datasheet download datasheet WM8533 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WM8505 Application Processor WonderMedia
WM8510 MONO CODEC Wolfson Microelectronics plc
WM8521 STEREO DAC Wolfson Microelectronics plc
WM8523 24-bit 192kHz Stereo DAC Cirrus Logic
WM8141 12-bit 6MSPS CIS/CCD Analogue Front End/Digitiser Wolfson Microelectronics plc

Other Datasheets by Wolfson Microelectronics

Part Number Description
WM8501 24-bit 192kHz Stereo DAC
WM8521 Stereo DAC
WM8522 192kHz 6-Channel DAC
WM8523 24-bit 192kHz Stereo DAC
WM8524 24-bit 192kHz Stereo DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
w WM8533 24-bit 192kHz Stereo DAC with 2Vrms Ground Referenced Line Output DESCRIPTION The WM8533 is a stereo DAC with integral charge pump and software control interface. This provides 2Vrms line driver outputs using a 3.3V power supply rail. The device features ground-referenced outputs and the use of a DC servo to eliminate the need for line driving coupling capacitors and effectively eliminate power on pops and clicks. The device is controlled and configured either via the I2C/SPI compliant serial control interface or a hardware control interface. The device supports all common audio sampling rates between 8kHz and 192kHz using all common MCLK / fs ratios. Master and slave modes are available and deemphasis is also supported. The WM8533 has a 1.8 to 3.