AXP288 Datasheet | X-Powers

X-Powers PMIC Optimized For Multi-Core High-Performance System Revision 1.07 2014.6.24 PMIC Optimized For Multi-Core High-Performance System Revision History Revision Rev 1.0 Rev 1.01 Rev 1.02 Rev 1.03 Rev 1.04 Rev 1.05 Rev 1.06 AXP288 Datasheet V1.06 Date 2013.12.10 2013.12.16 2013.12.18 2013.12.20 2014.1.24 2014.2.13 2014.5.23 Description Version1.0 for Intel 1. Table9-3, T0 change to 1000μs 2. Update table 9-41 and related register 3. Update table 9-43, add 4.35V OCV~percentage 1. Add Pb free description 1. Change the SCK/SDA pull high voltage to 1.8V in typical application circuit 1. Add power on interval description 2. Update table 10-92, change default value 3. Update table 10-77, remove bit[7] description 4. Change the capacitance of VCC_RTC to 10u F in typical application circuit 5. Update table 10-74, remove bit[1:0] description 6. Update table 10-36, remove bit[2] description 7. Update table 10-32, add bit[6] description 8. Swap IRQ description in REG 43H/44H/4BH/4CH 9. Update table 10-89, remove bit[1:0] description 10. Add VBAT condition in power on source 11. Correct table 10-50 description 12. Update table 10-32, add bit[6] description 13. Update the hysteresis of temperature protection threshold 14. Update table 10-9, change bit[3] description 15. Update table 10-4, describe how to clear the indication 1. Update QFN76 package description 2. Add QFN76 board layout example 3. Update table 10-106, correct bit[2:0] description 4. Correct OCV Percentage Table description 1. Version change: Reg03H: 0x41 to 0x51 2. Reg14[3] default value change to 1 3. Use Reg14[7] as an enable bit for cold reset within global reset input 4. When BC module isn’t work, disable RID detection by default 5. Update section 9.1 / 9.1.1 / 9.4 / 9.4.2 / 9.4.5 6. Update RTC_LDO output capacitor’s value 7. Update Reg80 bit[7], bit[3],bit[1] description Copyright © 2014 X-Powers Limited. All Rights Reserved. Rev 1.07 PMIC Optimized...