XECOM XE232NET
The XE232NET Serial-to-Ethernet bridge operates much the same as any Xecom serial modem. The XE232NET also utilizes the same pin configuration as the Xecom XE5690SM modem family. This permits one design to support either Ethernet or dial-up modem connectivity with a simple module swap.| Part No. | XE232NET |
|---|---|
| Datasheet | XE232NET Download |
| Manufacturer | XECOM |
| Description | Low Cost Serial-to-Ethernet Bridge |
| Buy | Stock & Price |
APPLICATIONS
DESCRIPTION
The Xecom XE232NET Serial-to-Ethernet Bridge modules provide a simple solution for connecting micro-controller based embedded systems to a Local Area Network. These modules include all of the hardware and software needed to link the serial port on the micro-controller to the local area network. AT commands are used for control and configuration of The XE232NET. Xecom offers two versions of the XE232NET. The XE232NET-1 with the Ethernet isolation transformer and the XE232NET-2 without the isolation transformer. An Evaluation Kit is available, model number XE232NET-KFEATURES
● Miniature Dual-In-line Package: 2.1” x 1.0”● TTL compatible serial interface;
● Operates from a single +3.3 volt power supply
● Includes 10 Base-T Ethernet MAC and PHY
● Embedded protocols include, Ethernet, TCP, IP, UDP, ICMP, DHCP, ARP, HTTP, POP3, and SMTP
● Command and control with Serial AT Commands
● IEEE 10BASE-T compatible Models
● XE232NET-1: Serial-to-Ethernet Bridge module with Ethernet isolation transformer included
● XE232NET-2: Serial-to-Ethernet Bridge module without isolation transformer.
