XP Power Limited SDS120
AC-DC Power Supplies
| Part No. | SDS120 |
|---|---|
| Datasheet | SDS120 Download |
| Manufacturer |  XP Power Limited |
| Description | AC-DC Power Supplies |
| Buy | Stock & Price |
AC-DC 120 Watts xppower.com SDS120 Series
●
●
●
●
●
●
● Single, Dual & Triple Outputs Convection-cooled 3” x 5” Footprint High Efficiency to 85% Open Frame, U-Channel & Covered Versions Low Temperature Option Optional Power Fail Detect Signal Specification Input Input Voltage Input Frequency Input Current
● 90-264 VAC (120-370 VDC)
● 47-63 Hz
● 1.7 A at 115 VAC 1.0 A at 230 VAC Inrush Current
● <30 A at 115 VAC <55 A at 230 VAC Power Factor
● 0.97 typical Earth Leakage Current
● <0.30 mA at 115 VAC <0.75 mA at 230 VAC Input Protection
● 3.15 A on board fuse General Efficiency Isolation
● 80% typical, 85% max, 230 VAC 100% load
● 3000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground
● PFC 100 kHz, PWM 67 kHz
● 4.87 W/In3
● Power Fail Detect = TTL active low, combined AC and DC OK signal (option)
● >100 kHrs per MIL-HDBK-217F Switching Frequency Power Density Signals MTBF Output Output Voltage Output Voltage Trim Initial Set Accuracy
● See table
● ±5% output 1 only (3.3 V variant ±10%)
● Single output models: ±1% Multi-output models: ±5% Minimum Load
● No minimum load required for single output models.
●
●
●
●
●
●
● Single, Dual & Triple Outputs Convection-cooled 3” x 5” Footprint High Efficiency to 85% Open Frame, U-Channel & Covered Versions Low Temperature Option Optional Power Fail Detect Signal Specification Input Input Voltage Input Frequency Input Current
● 90-264 VAC (120-370 VDC)
● 47-63 Hz
● 1.7 A at 115 VAC 1.0 A at 230 VAC Inrush Current
● <30 A at 115 VAC <55 A at 230 VAC Power Factor
● 0.97 typical Earth Leakage Current
● <0.30 mA at 115 VAC <0.75 mA at 230 VAC Input Protection
● 3.15 A on board fuse General Efficiency Isolation
● 80% typical, 85% max, 230 VAC 100% load
● 3000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground
● PFC 100 kHz, PWM 67 kHz
● 4.87 W/In3
● Power Fail Detect = TTL active low, combined AC and DC OK signal (option)
● >100 kHrs per MIL-HDBK-217F Switching Frequency Power Density Signals MTBF Output Output Voltage Output Voltage Trim Initial Set Accuracy
● See table
● ±5% output 1 only (3.3 V variant ±10%)
● Single output models: ±1% Multi-output models: ±5% Minimum Load
● No minimum load required for single output models.
