BA301
BA301 is DC to DC Converter manufactured by XP Power.
FEATURES
- Input π Filter
- Fully Regulated Outputs
- Industry Standard Pinouts
- 5, 12, 24, 28, and 48 VDC Inputs
- Ripple and Noise Less Than 50m Vpp
- Input/Output Isolation
Ordering Guide: Series/Input Code/Output Code
Example: BC302
- BC Series, 24 Volt Input, 12 Volt Output @ 0.47A
Input Code Series BA BC Output 1.5 Watts 5-6 Watts 1 2 3 4 5
Input Voltage BA/BC Series 5 V Nominal 12 V Nominal 24 V Nominal 28 V Nominal 48 V Nominal
Output Code 01 02 03 04 05
Output Voltage(s) 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC
BA Series Output Current(s) 300 m A 125 m A 100 m A ±60 m A ±50 m A
BC Series Output Current(s) 1.00 A 0.47 A 0.40 A ±0.23 A ±0.19 A
Electrical Specifications
All specifications typical at nominal line, full load and 25°C
Output Specifications:
Output Voltage Accuracy Line Regulation (Full Input Range) Load Regulation (10% to 100% Load) Ripple and Noise (DC-20MHz) Temperature Coefficient Short Circuit Protection
±4% 0.3% 0.5% 50 m Vpp- 0.02%/°C Short Term ±10% š Network 25 k Hz. 65% Typical 500 VDC 30 p F/100MΩ 14g/0.5 oz.
±1% 0.02% 0.05%
Input Specifications:
Input Voltage Range Input Filter See Table
General Specifications:
Switching Frequency Efficiency Isolation Voltage Isolation Capacitance/Resistance Weight
80p F/100MΩ 60g/2.2 oz.
Environmental Specifications:
Operating Temperature Storage Temperature -25°C. to +71° C -40°C. to +100°C.
- Reduced to 20 m Vpp with 15µF Tantalum Capacitor Across Outputs.
BA Series:
BC Series:
(BOTTOM VIEW)
Pin
1 2 3 10 11 12 13 14 15 22 23 24
Single
+ V Input NC- NC-...
