PD65
PD65 is DC/DC Converters manufactured by XPiQ.
..
DC/DC Converters
XPi Q inc.
Intelligent Design Quality Product
65 Watts PD65 Series
- Low Cost
- 100% Burn-In
- Small Size, Light Weight
- Three Wide Input Voltage Ranges 10-30 VDC, 20-60 VDC, 30-90 VDC
- Overvoltage Protection
- Overcurrent Protection
Specification
All specifications typical at nominal line, full load and 25°C
Input
Input Voltage
- 10 to 30 VDC (PD65 “L” series) 20 to 60 VDC (PD65 “M” series) 30 to 90 VDC (PD65 “H” series) 4.1A (rms) for 24 VDC 2.1A (rms) for 48 VDC 1.5A (rms) for 72 VDC
General
Efficiency Hold-up time Line Regulation Isolation Voltage
- -
- - 65%
- 80% 10 msec ±0.5% max. 1000 VDC from input to output
Environmental
Operating Temperature Storage Temperature MTBF Weight
- -
- - 0°C to +70°C- -40°C to +85°C 100,000 hours 380 grams
- PCB 640 grams
- enclosed
Input Current
- Output
Output Voltage/ Current Ripple Overvoltage Protection Overcurrent Protection: Temperature Coefficient:
- -
- See rating chart 1% peak to peak maximum Provided on output #1 only, set at 112-132% of its nominal output voltage All outputs protected in short circuit conditions All outputs ±0.04%/°C maximum
- -
- Derate linearly from 100% load at 50°C to 50% load at 70°C
.XP-i Q.
PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xp-iq. Holliston, MA 01746 USA
- -
OUTPUT VOLTAGE & CURRENT RATINGS
Output #1 Model PD65-10 PD65-12 PD65-13 PD65-14 PD65-25 PD65-30 PD65-31 PD65-32 PD65-40 Notes 1. All multi-output units may be operated at no load without damage. At no load, output tolerance increases to 10%. 2. Maximum output power for 10-30 VDC input range is 70% of that shown above. 3. Suffix codes for mechanical format and input range as follows: Input voltage range L: 10-30 VDC2 Mechanical format: A: PCB only M: 20-60 VDC C: Enclosed H: 30-90 VDC Vnom 5V 12V 15V 24V +5V +5V +5V +5V +5V Imin 0.0A 0.0A 0.0A 0.0A 1.0A 1.0A 1.0A 1.0A 1.0A Imax 10A 5.5A 4.5A 3.0A 6.0A 6.0A 6.0A 6.0A 6.0A Tol. 1% 1% 1% 1% 3% 3% 3% 3% 3% Vnom Output #2 Imin Imax Tol. Vnom...
