Xicor X25640
The X25640 is a CMOS 65,536-bit serial E2PROM, internally organized as 8K x 8. The X25640 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out (SO) lines.| Part No. | X25640 |
|---|---|
| Datasheet | X25640 Download |
| Manufacturer |  Xicor |
| Description | Advanced SPI Serial E2PROM With Block LockTM Protection |
| Buy | Stock & Price |
DESCRIPTION
8K x 8 Bit Advanced SPI Serial E2PROM With Block LockTM ProtectionFEATURES
●●
●
●
●
●
●
●
●
●
● 1MHz Clock Rate Low Power CMOS —200µA Standby Current —5mA Active Current 5 Volt Power Supply SPI Modes (0,0 & 1,1) 8K X 8 Bits —32 Byte Page Mode Block Lock Protection —Protect 1/4, 1/2 or all of E2PROM Array Built-in Inadvertent Write Protection —Power-Up/Power-Down protection circuitry —Write Enable Latch —Write Protect Pin Self-Timed Write Cycle —5ms Write Cycle Time (Typical) High Reliability —Endurance: 100,000 cycles —Data Retention: 100 Years —ESD protection: 2000V on all pins 8-Lead PDlP Package 14-Lead SOIC Package Access to the device is controlled through a chip select (CS) input, allowing any number of devices to share the same bus. The X25640 also features two additional inputs that provide the end user with added flexibility. By asserting the HOLD input, the X25640 will ignore transitions on its inputs, thus allowing the host to service higher priority interrupts.
