Datasheet4U Logo Datasheet4U.com

X46402 - Dual Voltage CPU Supervisor with 64K Password Protected EEPROM

Description

The X46402 combines several functions into one device.

The first is a dual voltage CPU supervisor plus 64Kbit serial EEPROM memory with password protected write and read operations.

The size of the password protected area is selectable by 3 control bits.

Features

  • Dual Voltage Detection and Reset Assertion.
  • Low Vcc Monitor.
  • Low V2MON Monitor.
  • Low Vcc Block of EEPROM Writes.
  • RESET Signal Valid down to Vcc=1V.
  • Selectable Watchdog Timer.
  • 150ms, 450ms, 1s, 5s, 10s, 20s, 1min, OFF.
  • Volatile Flag shows Watchdog/Low Voltage Reset.
  • 64kbit 2-wire Serial EEPROM.
  • 1MHz Serial Interface speed.
  • 64-Byte Page Write Mode.
  • Two 64-Byte OTP memory blocks.
  • Requires 64.

📥 Download Datasheet

Datasheet Details

Part number X46402
Manufacturer Xicor
File Size 102.65 KB
Description Dual Voltage CPU Supervisor with 64K Password Protected EEPROM
Datasheet download datasheet X46402 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
X4643 CPU Supervisor Intersil
X4645 CPU Supervisor Intersil

Other Datasheets by Xicor

Part Number Description
X4643 CPU Supervisor
X4645 CPU Supervisor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Information 64K X46402 Dual Voltage CPU Supervisor with 64K Password Protected EEPROM DESCRIPTION The X46402 combines several functions into one device. The first is a dual voltage CPU supervisor plus 64Kbit serial EEPROM memory with password protected write and read operations. The size of the password protected area is selectable by 3 control bits. A Write Protect (WP) pin in conjunction with a WPEN bit provides hardware OTP control of the configuration of the array. Password protected areas require 64 bit read or write passwords prior to access. The eighth illegal password entry (regardless of the number of correct entries) sets an OTP tamper bit. This bit is one of the 32 bits in the Device ID.
Published: |