Xicor X76F100
The X76F100 is a Password Access Security Supervisor, containing one 896-bit Secure SerialFlash array. These passwords protect read and write operations of the memory array. The X76F100 features a serial interface and software protocol allowing operation on a popular two wire bus.| Part No. | X76F100 |
|---|---|
| Datasheet | X76F100 Download |
| Manufacturer |  Xicor |
| Description | 1K 128 x 8 Bit |
| Buy | Stock & Price |
FEATURES
● 64-bit password security● One array (112-bytes) two passwords (16-bytes) —Read password —Write password
● Programmable passwords
● Retry counter register —Allows 8 tries before clearing of the array
● 32-bit response to reset (rst input)
● 8-byte sector Write Mode
● 1MHz clock rate
● 2-wire serial interface
● Low power CMOS —3.0 to 5.5V operation —Standby current less than 1µA —Active current less than 3 mA
● High reliability endurance: —100,000 write cycles
● Data retention: 100 years
● Available in: —8-lead PDIP, SOIC, MSOP, and smart car module
DESCRIPTION
Access to the memory array can be controlled by two 64-bit passwords. The bus signals are a clock Input (SCL) and a bidirectional data input and output (SDA). Access to the device is controlled through a chip select (CS) input, allowing any number of devices to share the same bus. The X76F100 also features a synchronous response to reset providing an automatic output of a hard-wired 32-bit data stream conforming to the industry standard for memory cards.
