XC4020XL
XC4020XL is XC4000E and XC4000X Series Field Programmable Gate Arrays manufactured by Xilinx.
Features
Note: Information in this data sheet covers the XC4000E, XC4000EX, and XC4000XL families. A separate data sheet covers the XC4000XLA and XC4000XV families. Electrical Specifications and package/pin information are covered in separate sections for each family to make the information easier to access, review, and print. For access to these sections, see the Xilinx web site at http://.xilinx./xlnx/xweb/xil_publications_index.jsp
- System featured Field-Programmable Gate Arrays
- Select RAMTM memory: on-chip ultra-fast RAM with
- synchronous write option
- dual-port RAM option
- Fully PCI pliant (speed grades -2 and faster)
- Abundant flip-flops
- Flexible function generators
- Dedicated high-speed carry logic
- Wide edge decoders on each edge
- Hierarchy of interconnect lines
- Internal 3-state bus capability
- Eight global low-skew clock or signal distribution networks
- System Performance beyond 80 MHz
- Flexible Array Architecture
- Low Power Segmented Routing Architecture
- Systems-Oriented Features
- IEEE 1149.1-patible boundary scan logic support
- Individually programmable output slew rate
- Programmable input pull-up or pull-down resistors
- 12 m A sink current per XC4000E output
- Configured by Loading Binary File
- Unlimited re-programmability
- Read Back Capability
- Program verification
- Internal node observability
- Backward patible with XC4000 Devices
- Development System runs on most mon puter platforms
- Interfaces to popular design environments
- Fully automatic mapping, placement and routing
- Interactive design editor for design optimization
Low-Voltage Versions Available
- Low-Voltage Devices Function at 3.0
- 3.6 Volts
- XC4000XL: High Performance Low-Voltage Versions of
XC4000EX devices
Additional XC4000X Series Features
- High Performance
- 3.3 V...
