PTC000x-01 Datasheet | YCL

Description The PTC000X-01 modular Jack has been specifically designed for implementation of fast Ethernet NIC Application . These modular consist of the isolation transformer. mon mode choke, termination resistors and high voltage capacitor termination to the shield. With high voltage isolation, optimized rise time, wide bandwidth and stable inductance, the transformer integrated the module provide excellent performance as an analog interface. mon mode choke have been designed to significantly reduce mon mode noise level which may contribute EMI emission. PTC000X-01 modular jack provide the system designer the opportunity of reducing pcb space. Specifications Parameter Inductance, Insertion loss Return loss Min. Max unit 350 µH @1-100MHz 1.0 d B @1-30MHz 16 d B @30-60MHz - note2 d B @60-80MHz 10 d B @1-60MHz Cross talk 40 d B @60-100MHz 38 d B @1-60MHz 45/40 d B CMRR(TX/RX) @60-100MHz 40/35 d B Voltage isolation 1500 vrms 0 0 70 C Operating temp. - note1 Feature - Designed for network interface card application. - Designed to meet IEEE802.3u requirement. - Available in all turn ratios used by LAN IC manufactures. - Primary center taps available for additional EMI reduction. - Simplest magnetic ponent to place and route on PCB. - Contains termination resistors , magnetic and connector. - Conserves PCB space. Turn Ratio Condition Part No.: PTC0001-01 PTC0002-01 PTC0003-01 PTC0004-01 PTC0006-01 PTC0007-01 PTC0008-01 TX 1CT : 1CT 1.414CT : 1CT 2CT : 1CT 1.25CT : 1CT 1CT : 1.414CT 1CT : 1.25CT 1CT : 2CT RX 1CT : 1CT 1CT : 1CT 1CT : 1CT 1CT : 1CT 1CT : 1CT 1CT : 1CT 1CT : 1CT Note 1 : measured at 8m Adc over operating temperature 0-700C Note 2: Greater than (16-20 log(f/30 MHz)) d B Schematic 0.001u F SHIELD P8 P6 P7 P2 P3 P1 RX 75 TX 75 75 75 J8 J7 J6 J5 J4 J3 J2 J1 EDPS-PTC003(R5)01/25/2002 Data sheet subject to change without notice SHEET 1 OF 5 Test Requirements and Procedures No 1 Item Examination of product. Requirement Meet requirements of product drawing...