VK1024B Description
VK1024B is a RAM Mapping 6x4 LCD Driver，It can support LCD screens with a maximum of 24 pattern(6SEGx4)，it is also supports LCD screens of 2 or 3.Only 3 lines are required to munication interface with the VK1024B , it is used to configure display parameters and transfer display data, and can also enter the standby mode through Power down mand. Name 1 /CS 2 /WR 3 DATA I/O Function I Chip selection input with pull-up...
VK1024B Key Features
- Operating voltage 2.4-5.2V
- Built-in 256kHz RC oscillator（default）
- Selection of 1/2 or 1/3 bias
- Selection of 1/2 or 1/3 or 1/4 duty
- Built-in 6×4 bit display RAM
- STANDBY mode（by Cmd LCD OFF,SYS DIS）
- 3 wire serial interface
- Software configuration LCD parameters
- Data mode and mand mode instructions
- Write address auto increment