AZ695 Datasheet | ZETTLER Electronics

FEATURES - Extremely small footprint utilizing only 0.18 square inch of PCB area - Thin vertical profile only 0.256" wide - 1 Form A contact with up to 5 Amp switching capability - High sensitivity, 100 m W pickup - Dielectric strength 3000 Vrms contact to coil - Coils to 24 VDC - Epoxy sealed for automatic wave soldering and cleaning - Sockets are also available - UL file E44211; CSA file 74461 CONTACTS Arrangement Ratings SPST (1 Form A) Resistive load: GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 20 million operations 1 X 105 at 5 A, 30 VDC or 250 VAC 6 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) 750 Vrms between open contacts 3000 Vrms contact to coil 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" DA at 10- 55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 3 grams Max. switched power: 150 W or 1250 VA Operate Time (typical) Max. switched current: 5 A Max. switched voltage: 150- VDC or 250 VAC Release Time (typical) Inductive load (p.f. = 0.40, L/R = 7 ms) 2 A at 250 VAC, 30 VDC .. UL Rating: 5 A at 30 VDC or 250 VAC Dielectric Strength 1/ (at sea level for 1 min.) 10 HP 120 VAC Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Material Options: Silver cadmium oxide Silver cadmium oxide with gold plating < 30 milliohms initially (at rated current, voltage drop method) Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 100 m W 550 m W at 20°C (68°F) ambient 420 m W at 40°C (104°F) ambient 25°C (45°F) at nominal coil voltage Max. 105°C (221°F) Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max....