AZ755 Datasheet | ZETTLER Electronics

FEATURES - - - - - - - Dielectric strength 5000 Vrms Low cost Epoxy sealed version available 20 Amp switching - single pole contacts Isolation spacing greater than 8mm UL, CUR file E44211 TÜV file R9659060 GENERAL DATA SPST (1 Form A, 1 Form B) SPDT (1 Form C) Resistive load: Max. switched power: 480 W or 5540 VA Max. switched current: 20 A Max. switched voltage: 150 VDC- or 380 VAC - Note: If switching voltage is greater than 30 VDC, CONTACTS Arrangement Ratings Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 5 x 106 5 x 104 at 16 A 250 VAC Res. 2 x 104 at 20 A 277 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Rated Load UL, CUR TÜV Material Resistance 20 A at 277 VAC N.O. resistive, 50k cycles 16 A at 240 VAC general use, 100k cycles Insulation .. 12 A at 277 VAC N.O. resistive., 100k cycles Resistance 20 A at 24 VDC resistive Dropout 1 HP 240 VAC TV-8 120 VAC N.O. (silver tin oxide only) Ambient Temperature 16 A at 30 VDC, 250 VAC resistive, 100k cycles Operating 13 A at 420 VAC res., 100k cycles (1 Form A) Storage Silver cadmium oxide or silver tin oxide < 50 milliohms initially (24 V, 1 A voltage drop method) Vibration Shock Enclosure Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts 1000 megohms min. at 20°C 500 VDC 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10- 55 Hz 10 g P.B.T. polyester Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 Seconds 18.5 grams 50 per plastic tray / 500 per carton box COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 270 m W 1.9 W at 20°C (68°F) ambient Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion...