LIN-21HAW1 - Linear Position Sensors

This page provides the datasheet information for the LIN-21HAW1, a member of the LIN-11HAW1 Linear Position Sensors family.

Datasheet Summary

Description

The LIN Series sensors are non-contact linear position sensors with one or two independent outputs.

The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets.

Features

Easy setup and robust monitoring with M4 screws.
Dual independent (redundant) outputs assure high reliability.
Custom programming available for: range, slope, PWM output.
No mechanical interface means no parts to wear out or jam.
Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector.
RoHS Compliant.
IP68.
Suitable for wide air gap.

📥 Download Datasheet

LIN-21HAW1 Linear Position Sensors by ZF - Datasheet Preview — Datasheet preview – LIN-21HAW1

Datasheet Details

Part number	LIN-21HAW1
Manufacturer	ZF
File Size	399.72 KB
Description	Linear Position Sensors
Datasheet	LIN-21HAW1 Datasheet
Additional preview pages of the LIN-21HAW1 datasheet.

📁 Similar Datasheet

Other Datasheets by ZF

LIN-11HAW1 - Linear Position Sensors

Full PDF Text Transcription

Click to expand full text

Linear Position Sensors LIN Sensors – Kit with magnet Thin, programmable, non-contact magnetic position sensors with dual outputs available Description The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet. The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield less than optimal performance.

Published: Sep 7, 2019 |