Datasheet4U Logo Datasheet4U.com

MV1442 - HDB3 Encoder/Decoder/Clock Regenerator

Datasheet Summary

Description

High Density Bipolar 3 (HDB3) is a pseudo-ternary transmission code in which the number of consecutive zeros which may occur is restricted to three to allow adequate clock recovery at the receiver.

Features

  • On-chip Digital Clock Regenerator.
  • HDB3 Encoding and Decoding to CCITT Recommendation G.703.
  • Asynchronous Operation.
  • Simultaneous Encoding and Decoding.
  • Clock Recovery Signal allows Off-chip Clock Regeneration.
  • Loop Back Control.
  • HDB3 Error Monitor.
  • ‘All Ones’ Error Monitor.
  • Loss of Input Alarm.
  • Low Power Operation.
  • 2.048MHz or 1.544MHz Operation in External or Internal Clock Recovery mode.

📥 Download Datasheet

Datasheet preview – MV1442

Datasheet Details

Part number MV1442
Manufacturer Zarlink Semiconductor
File Size 726.38 KB
Description HDB3 Encoder/Decoder/Clock Regenerator
Datasheet download datasheet MV1442 Datasheet
Additional preview pages of the MV1442 datasheet.
Other Datasheets by Zarlink Semiconductor

Full PDF Text Transcription

Click to expand full text
Obsolescence Notice This product is obsolete. This information is available for your convenience only. For more information on Zarlink’s obsolete products and replacement product lists, please visit http://products.zarlink.com/obsolete_products/ MV1442 HDB3 Encoder/Decoder/Clock Regenerator DS3077 ISSUE 4.0 July 2001 The MV1442, along with other devices in the Zarlink 2Mbit PCM signalling series comprise a group of circuits which will perform the common channel signalling and error detection functions for a 2.048Mbit PCM transmission link operating in accordance with the appropriate CCITT recommendations. The circuits are fabricated in CMOS and operate from a single +5V supply with all inputs and outputs being TTL compatible.
Published: |