ZL10060 Datasheet | Zarlink Semiconductor

Features - Highly integrated mixer/oscillator PLL and IF AGC amplifier for multi band analog/digital terrestrial tuners and/or cable tuners Low phase noise PLL frequency synthesizer AGC output level detect with digital controlled TOP threshold >50 d B Desired/Undesired ratio without pre Separate analog and digital IF outputs >41 d B IF AGC Control range Power down modes to support power reduction initiatives Four independent GPO 48 pin QFN Package November 2005 Ordering Information ZL10060LDG1 48 Pin QFN- Trays ZL10060LDF1 48 Pin QFN- Tape and Reel - Pb Free Matte Tin -20° C to +85 ° C - - - - - - - - Description The ZL10060 is a 3 band MOPLL with IF AGC amplifier. It down-converts the RF channel to a standard IF followed by filtering and IF AGC amplification for the digital channel. Each band consists of a low noise preamplifier/mixer and local oscillator with an external varactor tuned tank circuit. An IF level detector is included for control of the RF AGC. The Take Over Point and time constant are both programmable. The ZL10060 has high signal level handling performance providing excellent performance in the presence of high level unwanted signals. All chip control is via I2C bus. If higher performance is required, an alternative part, ZL10063 is available with image reject down conversion. .. filtering Applications - - - - DVB-T receiver systems ISDB-T receiver systems DVB-C cable receiver systems Terrestrial analog receivers Band Pass Filter Analog IF SAW Digital IF SAW Analog Analog IF Demod LNA and Tracking Filters RF Input Digital IF Digital Demod IF AGC AGC Det I2C Control I2C Tuning RF AGC VCO Tank Circuits Loop Filter Figure 1 - Basic Block Diagram 1 Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2005, Zarlink Semiconductor Inc. All Rights Reserved. ZL10060 Table of Contents Data...