Zbit ZB25D80
The ZB25D80 of non-volatile flash memory devices supports the standard Serial Peripheral Interface (SPI). This multiple width interface is called SPI Multi-I/O or MIO. The SPI protocols use only 4 signals: Chip Select (CS#) Serial Clock (CLK) Serial Data - IO0 (DIO) - IO1 (DO) The DIO protocol uses Serial Input (DI) and Serial Output (DO) for data transfer.| Part No. | ZB25D80 |
|---|---|
| Datasheet | ZB25D80 Download |
| Manufacturer | Zbit |
| Description | 3V 8M-BIT SERIAL NOR FLASH |
| Buy | Stock & Price |
FEATURES
● Single power supply operation - Full voltage range: 2.7-3.6 volt● 8 Mbit Serial Flash - 8 M-bit/1024 K-byte/4096 pages - 256 bytes per programmable page - Uniform 4K-byte Sectors/64K-byte Blocks
● Standard and Dual - Standard SPI: CLK, CS#, DI, DO, WP# - Dual SPI: CLK, CS#, DIO, DO, WP# - Fast Read Dual Output instruction - Auto-increment Read capability
● Temperature Ranges - Industrial (-40°C to +85°C) - Extended (-20°C to +85°C)
● Low power consumption - 9 mA typical active current - 2 uA typical power down current ZB25D80
● Flexible Architecture with 4KB sectors - Sector Erase (4K-bytes) - Block Erase (64K-bytes) - Page Program up to 256 bytes - More than 100K erase/write cycles - More than 20-year data retention
● Software and Hardware Write Protection - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin
● High performance program/erase speed - Page program time: 0.5ms typical - Sector erase time: 40ms typical - Block erase tim...
