ZXCT1032 - High-side inrush controller and electronic fuse
Zetex (now Diodes Incorporated)
General Description
The ZXCT1032 is a high-side current monitor that drives a PMOS or PNP transistor to provide in-rush current limit and over-current protection.
The ZXCT1032 includes a high accuracy high-side current monitor, a start-up timer and a re-try inhibit timer.
Key Features
Accurate high-side current sensing User defined and dynamically adjustable trip current Load switch control Fault flag logic output User defined ramp and inhibit timers SO8 package Temperature range -40 to 85°C.
Full PDF Text Transcription for ZXCT1032 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
ZXCT1032. For precise diagrams, and layout, please refer to the original PDF.
ZXCT1032 High-side inrush controller and electronic fuse Description The ZXCT1032 is a high-side current monitor that drives a PMOS or PNP transistor to provide in-rush c...
View more extracted text
rent monitor that drives a PMOS or PNP transistor to provide in-rush current limit and over-current protection. The ZXCT1032 includes a high accuracy high-side current monitor, a start-up timer and a re-try inhibit timer. The ZXCT1032 takes the voltage developed across a current shunt resistor and compares this with an externally set trip point. It works in three modes: • • • Linear soft-start Over-current detector Over-current disconnect/fuse While in this mode the internal current monitor continually checks the output current and compares it to the trip-current level determined by VISET.
More Datasheets from Zetex (now Diodes Incorporated)
ZXCT1032 Datasheet
