Datasheet4U Logo Datasheet4U.com

AS1119 - 144-LED Cross-Plexing Driver

General Description

The AS1119 is a compact LED driver for 144 (90) single LEDs.

The devices can be programmed via an I²C compatible interface.

The AS1119 offers two blocks driving each 72 LEDs (3 blocks each 30LEDs) with 1/9 (1/6) cycle rate.

Key Features

  • very low shutdown and operational current. The device is available in a ultrasmall 36-pin WL-CSP. 2 Key Features 1MHz I²C-Compatible Interface Open and Shorted LED Error Detection 144 LEDs in Dot Matrix Low-Power Shutdown Current Individual 8-bit LED PWM Control 8-bit Analog Brightness Control (1:1), 2:3, 1:2 320mA Charge Pump 6 Frames Memory for Animations System-clk synchronisation for multiple devices Supply Voltage Range: 2.7V to 5.5V Minimum PCB space required 36-pin WL-CSP package Figure.

📥 Download Datasheet

Datasheet Details

Part number AS1119
Manufacturer austriamicrosystems AG
File Size 1.05 MB
Description 144-LED Cross-Plexing Driver
Datasheet download datasheet AS1119 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS111 Voltage Comparator Micross
AS111 Voltage Comparator Austin Semiconductor
AS1110 16-Channel LED Driver ams
AS1111 Low-Dropout LED Drivers ams
AS1117 800mA Low Dropout Regulator Sipex

Other Datasheets by austriamicrosystems AG

Part Number Description
AS1110 16-Channel LED Driver
AS1112 16-Channel LED Driver
AS1113 16-Channel LED Driver
AS1115 Interfaced LED Driver
AS1116 64 LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Technical coantmesntAsGtill valid Datasheet AS1119 144-LED Cross-Plexing Driver with 320mA Charge-Pump 1 General Description The AS1119 is a compact LED driver for 144 (90) single LEDs. The devices can be programmed via an I²C compatible interface. The AS1119 offers two blocks driving each 72 LEDs (3 blocks each 30LEDs) with 1/9 (1/6) cycle rate. The required lines to drive all 144 (90 )LEDs are reduced to 18 by using the cross-plexing feature optimizing space on the PCB. Every block driving 72(30) LEDs can be analog dimmed from 1 to 30mA in 256 steps (8 bit). Additionally each of the 144 (90) LEDs can be dimmed individually with 8-bit allowing 256 steps of linear dimming.