GENERAL DESCRIPTION
Resistor trimming during final test ensures a typical common mode rejection of 60dB. Low input bias currents, 10MHz gain bandwidth, low total harmonic distortion (THD) and a rail-to-rail output drive capability of typically 200mA (@ 5V supply) provide support for a number of signal processing applications such as audio line receivers, ground loop breakers and current sensing. Linearity is suitable for 12bit ADC measurement. A classical single amplifier approach ensures that the differential gain is determined by a simple ratio of two internal resistors. A fixed gain of x1 is available. Single ended input resistance is equalised (10kΩ ±10%) at each input terminal. This feature provides additional common mode rejection when long balanced input cables connect at the input. A EN pin reduces the quiescent current of the device. 2 Key FEATURES
! ! ! ! ! ! ! ! ! ! ! ! ! Constant Output Drive Capability: 50mA Rail-to-Rail Input and Output Supply Current: 1.6mA Single-Supply...
austriamicrosystems AG
