Datasheet4U Logo Datasheet4U.com

AS3527 - Advanced Audio Processor System

General Description

The AS3665 is a capacitive low noise charge pump with 9 current sources.

The charge pump automatically switches between 1:1 and 1:1.5 modes.

The connected current sources have a very low voltage compliance to improve efficiency of the whole system.

Key Features

  • High efficiency capacitive 150mA charge pump with 1:1, 1:1.5 and 1:2 modes with automatic mode switching; 1:2 mode can be disabled 9 Channel High Side 20mA Current sources - Less than 50mV at 10mA dropout voltage - LED7,8,9 either powered by VBAT or VCP Advanced Command based Pattern Generator - 96 x 16 bits program memory - Dedicated lighting commands like logarithmic fade - Programming control and conditional jumps Audio Controlled Lighting with internal digital filters 3 Sequencers - Dynamica.

📥 Download Datasheet

Datasheet Details

Part number AS3527
Manufacturer austriamicrosystems AG
File Size 3.51 MB
Description Advanced Audio Processor System
Datasheet download datasheet AS3527 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS3524 PASSIVATED ANISOTROPIC RECTIFIER TECHNOLOGY General Semiconductor
AS3528 PASSIVATED ANISOTROPIC RECTIFIER TECHNOLOGY General Semiconductor
AS35 Precision Centigrade Temperature Sensor Alpha Semiconductor
AS35-M23S 23-Bits Single-Turn Absolute Encoder Broadcom
AS3510 Analog Audio Front-End Austriamicrosystems

Other Datasheets by austriamicrosystems AG

Part Number Description
AS3520 Advanced Audio Decoder
AS3521B Advanced Audio Decoder
AS3524 Advanced Audio Processor System
AS3525 Advanced Audio Processor System
AS3500 Low Power Ambient Noise-Cancelling Speaker Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com AS3665 1 General Description The AS3665 is a capacitive low noise charge pump with 9 current sources. The charge pump automatically switches between 1:1 and 1:1.5 modes. The connected current sources have a very low voltage compliance to improve efficiency of the whole system. Three current sources have the possibility to operate either from VBAT or VCP (especially useful for red LEDs). The internal control is done by command based pattern generators implemented by three sequencers. These commands are optimized for lighting applications (e.g. ramp up brightness logarithmically). It includes high level commands like conditionals jumps and variables. Any of the three sequencers can be dynamically mapped to any of the 9 PWM generators for the LEDs.