Datasheet4U Logo Datasheet4U.com

CM8600A - 3 Watt Audio Power Amplifier

Description

The CM8600 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications.

Features

  • a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection. Driving the shutdown mode pin either high or low enables the shutdown pin to be driven in a likewise manner to enable shutdown. The CM8600 contains advanced pop & click circuitry which eliminates noise which would otherwise occur during turnon and turn-off transitions. The CM8600 is unity-gain stable and can be configured by external gain-setting resistors.

📥 Download Datasheet

Datasheet preview – CM8600A

Datasheet Details

Part number CM8600A
Manufacturer ccmic
File Size 1.07 MB
Description 3 Watt Audio Power Amplifier
Datasheet download datasheet CM8600A Datasheet
Additional preview pages of the CM8600A datasheet.

📁 Similar Datasheet

  • CM8600 - 3 Watt Audio Power Amplifier (Plough)
  • CM8601 - 3 Watt Audio Power Amplifier (Micro Technology)
  • CM8602B - 2.4W Audio Amplifier Stereo (ETC)
  • CM8608 - CLASS AB STEREO HEADPHONE DRIVER (Champion)
  • CM8608 - Class AB Stereo Headphone Driver (Bookly)
  • CM8662 - AUDIO POWER AMP (Champion)
  • CM8662 - 1.7W CMOS AUDIO AMP (BOOKLY MICRO)
  • CM8663 - STEREO AUDIO POWER AMP (Champion)
  • CM8685 - 5W MONO CLASS D PLUS AUDIO AMPLIFIER (Champion)
  • CM8-001R - COMMON MODE CHOKES (GROUP-TEK)
Other Datasheets by ccmic
  • CM8600C - 3W Mono Class AB Audio Amplifier
  • CM8601 - 3 Watt Audio Power Amplifier

Full PDF Text Transcription

Click to expand full text
CM8600A 3 Watt Audio Power Amplifier with Selectable Shutdown Logic Level General Description The CM8600 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to an 8 BTL load and 2 watts of continuous average power (LD and MH only) to a 4ΩBTL load with less than 1% distortion (THD+N+N) from a 5.5V DC power supp ly. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components.
Published: |