Texas Instruments 2N7001T
The 2N7001T is a single-bit buffered voltage signal converter that uses two separate configurable powersupply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65 V and up to 3.60 V. This device is fully specified for partial-power-down applications using the Ioff current.| Part No. | 2N7001T |
|---|---|
| Datasheet | 2N7001T Download |
| Manufacturer |  Texas Instruments |
| Description | Single-Bit Dual-Supply Buffered Voltage Signal Converter |
| Buy | Stock & Price |
FEATURES
●1 Up and Down Translation across 1.65 V to 3.6 V● Operating Temperature: –40°C to +125°C
● Maximum Quiescent Current (ICCA + ICCB) of 14 µA (125°C Maximum)
● Up to 100 Mbps support across the full supply range
● VCC Isolation Feature – If Either VCC Input is Below 100 mV, the output becomes High-Impedance
● Ioff Supports Partial-Power-Down Mode Operation
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Protection Exceeds JESD 22 – 2000-V Human Body Model – 1000-V Charged-Device Model 2
APPLICATIONS
● MCU/FPGA/Processor GPIO Translation● Communications Modules to Processor Translation
● Push-Pull I/O Buffering 3
DESCRIPTION
VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down. The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.
