Datasheet4U Logo Datasheet4U.com

74HC151 - 8-Line To 1-Line Data Selectors/Multiplexers

General Description

This data selector/multiplexer provides full binary decoding to select one of eight data sources.

The strobe (G) input must be at a low logic level to enable the inputs.

A high level at the strobe terminal forces the standard output (Y) low and the inverted output (W) high.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • Outputs can drive up to 10 LSTTL loads.
  • Low power consumption, 80-μA max ICC.
  • Typical tpd = 13 ns.
  • ±6-mA Output drive at 5 V.
  • Low input current of 1 μA max.
  • 8-Line to 1-line multiplexers can perform as:.
  • Boolean-function generators.
  • Parallel-to-serial converters.
  • Data source selectors 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC151 8-input multiplexer Philips
74HC151 8-input multiplexer nexperia
74HC151-Q100 8-input multiplexer NXP
74HC151-Q100 8-input multiplexer nexperia
74HC151D 8-Channel Multiplexer Toshiba

Other Datasheets by Texas Instruments

Part Number Description
74HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers
74HC157 Quad 2-Input Multiplexers
74HC158 Quad 2-Input Multiplexers
74HC10 Triple 3-Input NAND Gates
74HC109 Dual J-K Positive-Edge-Triggered Flip-Flops

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC151, SN74HC151 SCLS110F – DECEMBER 1982 – REVISED FEBRUARY 2022 SNx4HC151 8-Line To 1-Line Data Selectors/Multiplexers 1 Features • Wide operating voltage range of 2 V to 6 V • Outputs can drive up to 10 LSTTL loads • Low power consumption, 80-μA max ICC • Typical tpd = 13 ns • ±6-mA Output drive at 5 V • Low input current of 1 μA max • 8-Line to 1-line multiplexers can perform as: – Boolean-function generators – Parallel-to-serial converters – Data source selectors 2 Description This data selector/multiplexer provides full binary decoding to select one of eight data sources. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the standard output (Y) low and the inverted output (W) high.