Datasheet4U Logo Datasheet4U.com

74HC245 - Octal Bus Transceivers

General Description

These octal bus transceivers are designed for asynchronous two-way communication between data buses.

The control-function implementation minimizes external timing requirements.

Key Features

  • Wide Operating Voltage Range of 2 V to 6 V.
  • High-Current 3-State Outputs Drive Bus Lines Directly or Up to 15 LSTTL Loads.
  • Low Power Consumption, 80-μA Max ICC.
  • Typical tpd = 12 ns.
  • ±6-mA Output Drive at 5 V.
  • Low Input Current of 1 μA Max.
  • On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters. 2 App.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC245 Octal bus transceiver NXP
74HC245 Octal 3-State Noninverting Bus Transceiver ON Semiconductor
74HC245 Octal bus transceiver nexperia
74HC245-Q100 Octal bus tranceiver NXP
74HC245-Q100 Octal bus tranceiver nexperia

Other Datasheets by Texas Instruments

Part Number Description
74HC240 High-Speed CMOS Logic Octal Buffer/Line Drivers
74HC241 High-Speed CMOS Logic Octal Buffer/Line Drivers
74HC244 Octal Buffers and Line Drivers
74HC251 Data Selectors/Multiplexers
74HC257 High-Speed CMOS Logic Quad 2-Input Multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC245, SN74HC245 SCLS131F – DECEMBER 1982 – REVISED AUGUST 2022 SNx4HC245 Octal Bus Transceivers With 3-State Outputs 1 Features • Wide Operating Voltage Range of 2 V to 6 V • High-Current 3-State Outputs Drive Bus Lines Directly or Up to 15 LSTTL Loads • Low Power Consumption, 80-μA Max ICC • Typical tpd = 12 ns • ±6-mA Output Drive at 5 V • Low Input Current of 1 μA Max • On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.