Datasheet4U Logo Datasheet4U.com

74HC273 - Octal D-Type Flip-Flops

General Description

The SNx4HC273 devices are positive-edge-triggered D-type flip-flops with a direct active low clear ( CLR) input.

Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock (CLK) pulse.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • Outputs can drive up to 10 LSTTL loads.
  • Low power consumption, 80-µA maximum ICC.
  • Typical tpd = 12 ns.
  • ±4-mA output drive at 5 V.
  • Low input current of 1-µA maximum.
  • Contain eight flip-flops with single-rail outputs.
  • Direct clear input.
  • Individual data input to each flip-flop.
  • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC273 Octal D-type flip-flop NXP
74HC273 Octal D-type flip-flop nexperia
74HC273-Q100 Octal D-type flip-flop NXP
74HC273-Q100 Octal D-type flip-flop nexperia
74HC273A Octal D Flip-Flop ON Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
74HC27 Triple 3-Input NOR Gates
74HC240 High-Speed CMOS Logic Octal Buffer/Line Drivers
74HC241 High-Speed CMOS Logic Octal Buffer/Line Drivers
74HC244 Octal Buffers and Line Drivers
74HC245 Octal Bus Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC273, SN74HC273 SCLS136F – DECEMBER 1982 – REVISED APRIL 2022 SNx4HC273 Octal D-Type Flip-Flops With Clear 1 Features • Wide operating voltage range of 2 V to 6 V • Outputs can drive up to 10 LSTTL loads • Low power consumption, 80-µA maximum ICC • Typical tpd = 12 ns • ±4-mA output drive at 5 V • Low input current of 1-µA maximum • Contain eight flip-flops with single-rail outputs • Direct clear input • Individual data input to each flip-flop • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.