Datasheet4U Logo Datasheet4U.com

AWR2243 - Single-Chip 76- to 81-GHz FMCW Transceiver

Description

The AWR2243 device is an integrated single-chip FMCW transceiver capable of operation in the 76GHz to 81GHz band.

The device enables unprecedented levels of integration in an extremely small form factor.

Features

  • FMCW transceiver.
  • Integrated PLL, transmitter, receiver, baseband, and ADC.
  • 76GHz to 81GHz coverage with 5GHz available bandwidth.
  • Four receive channels.
  • Three transmit channels.
  • Ultra-accurate chirp engine based on Fractional-N PLL.
  • TX power: 13dBm.
  • RX noise figure: 13dB.
  • Phase noise at 1MHz:.
  • 96dBc/Hz (76GHz to 77GHz).
  • 94dBc/Hz (77GHz to 81GHz).
  • Built-in calibration an.

📥 Download Datasheet

Datasheet preview – AWR2243

Datasheet Details

Part number AWR2243
Manufacturer Texas Instruments
File Size 1.70 MB
Description Single-Chip 76- to 81-GHz FMCW Transceiver
Datasheet download datasheet AWR2243 Datasheet
Additional preview pages of the AWR2243 datasheet.

📁 Similar Datasheet

  • AWR0900 - 900 MHz Receiver MMIC (Anadigics)
Other Datasheets by Texas Instruments
  • AWR2544 - 76-81GHz FMCW Radar SoC
  • AWR2943 - 76 to 81GHz FMCW Radar Sensor
  • AWR2944 - 76 to 81GHz FMCW Radar Sensor
  • AWR2944LC - 76 to 81GHz FMCW Radar Sensor
  • AWR1243 - FMCW Transceiver
  • AWR1443 - FMCW Radar Sensor
  • AWR1642 - FMCW Radar sensor
  • AWR1843 - Single-Chip 77- to 79-GHz FMCW Radar Sensor

Full PDF Text Transcription

Click to expand full text
AWR2243 SWRS223D – FEBRUARY 2020 – REVISED FEBRUARY 2024 AWR2243 Single-Chip 76- to 81-GHz FMCW Transceiver 1 Features • FMCW transceiver – Integrated PLL, transmitter, receiver, baseband, and ADC – 76GHz to 81GHz coverage with 5GHz available bandwidth – Four receive channels – Three transmit channels – Ultra-accurate chirp engine based on Fractional-N PLL – TX power: 13dBm – RX noise figure: 13dB – Phase noise at 1MHz: • –96dBc/Hz (76GHz to 77GHz) • –94dBc/Hz (77GHz to 81GHz) • Built-in calibration and self-test – Built-in firmware (ROM) – Self-calibrating system across process and temperature • Host interface – Control interface with external processor over SPI or I2C interface – Data interface with external processor over MIPI D-PHY and CSI2 v1.
Published: |