Datasheet Details
| Part number | BQ2063 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 867.22 KB |
| Description | SBS v1.1-Compliant Li-Ion Gas-Gauge |
| Datasheet | BQ2063-etcTI.pdf |
|
|
Overview: D Provides Accurate Measurement of Available Charge in Li-Ion Batteries D Supports the 2-Wire SMBus V1.1 Interface With PEC or Single-Wire HDQ16 D Directly Interfaces the Seiko S-8243 Protection IC for Maximum Safety Protection and Minimal Component Count D Supports Internal or External Thermistor D Reports Individual Cell Voltages D Uses 15-Bit ADC for Accurate Voltage, Temperature, and Current Measurements D Measures Charge Flow Using A V-to-F Converter With Offset of Less Than 16 µV After Calibration D Consumes Less Than 0.5 mW Operating D Drives 4- or 5-Segment LED Display for Remaining Capacity Indication D 28-Pin 150-Mil SSOP bq2063 SBS v1.
| Part number | BQ2063 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 867.22 KB |
| Description | SBS v1.1-Compliant Li-Ion Gas-Gauge |
| Datasheet | BQ2063-etcTI.pdf |
|
|
|
The bq2063 SBS-compliant gas gauge IC for battery-pack or in-system installation maintains an accurate record of available charge in Li-Ion batteries.
The bq2063 monitors capacity and other critical parameters in Li-Ion battery packs.
It also directly interfaces the Seiko S-8243 protection IC to minimize component count in smart-battery circuits.
Compare BQ2063 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.
| Part Number | Description |
|---|---|
| bq2060 | SBS V1.1-COMPLIANT GAS-GAUGE |
| bq2060A | SBS v1.1-Compliant Gas-Gauge |
| BQ2000 | Programmable Multi-Chemistry Fast-Charge Management |
| BQ2000T | Programmable Multi-Chemistry Fast-Charge Management |
| bq2007 | Fast-Charge IC |
| bq2016 | GAS GAUGE |
| BQ2019 | Advanced Battery Monitor |
| BQ2022 | 1-Kbit Serial EPROM |
| BQ2022A | 1-Kbit Serial EPROM |
| BQ2023 | Advanced Battery Monitor |