Datasheet4U Logo Datasheet4U.com

BQ25120 - Highly Integrated Battery Charge Management Solution

General Description

The bq2512x is a highly integrated battery charge management IC that integrates the most common functions for wearable devices: Linear charger, regulated output, load switch, manual reset with timer, and battery voltage monitor.

Key Features

  • 1 Increases System Operation Time Between Charges.
  • Configurable 300-mA Buck Regulator (1.8-V Default).
  • 700 nA (typical) Iq with Buck Converter Enabled (No Load).
  • Configurable Load Switch or 100mA LDO Output (Load Switch by Default).
  • Up to 300-mA Charge Current for Fast Charging.
  • 0.5% Accurate Battery Voltage Regulation (Configurable from 3.6 V to 4.65 V in 10-mV Steps).
  • Configurable Termination Current Down to 500 µA.
  • Simple.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
bq2502 Integrated Backup Unit BENCHMARQ
BQ2540-7R 60...132 Watt DC-DC Converters Power-One
BQ2001-7R 60...132 Watt DC-DC Converters Power-One
BQ2002 NiCd/NiMH Fast-Charge Management Benchmarq
BQ2002C NiCd/NiMH Fast-Charge Management UNITRODE

Other Datasheets by Texas Instruments

Part Number Description
bq25120A Highly Integrated Battery Charge Management Solution
BQ25121 Highly Integrated Battery Charge Management Solution
BQ25125 Highly Integrated Battery Charger
bq25100 250-mA Single Cell Li-Ion Battery Chargers
bq25100A 250-mA Single Cell Li-Ion Battery Chargers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community BQ25120, BQ25121 SLUSBZ9C – AUGUST 2015 – REVISED SEPTEMBER 2016 bq2512x 700-nA Low IQ Highly Integrated Battery Charge Management Solution for Wearables and IoT 1 Features •1 Increases System Operation Time Between Charges – Configurable 300-mA Buck Regulator (1.8-V Default) – 700 nA (typical) Iq with Buck Converter Enabled (No Load) – Configurable Load Switch or 100mA LDO Output (Load Switch by Default) – Up to 300-mA Charge Current for Fast Charging – 0.5% Accurate Battery Voltage Regulation (Configurable from 3.6 V to 4.65 V in 10-mV Steps) – Configurable Termination Current Down to 500 µA – Simple Voltage Based Battery Monitor • Highly Integrated Solution with Small Footprint – 2.5 mm x 2.