Texas Instruments CC1311P3
The CC1311P3 is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics, and medical applications. The CC1311P3 has a software-defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in 143MHz to 176MHz, 287MHz to 351MHz, 359MHz to 527-MHz, 861MHz to 1054MHz, and 1076MHz to 1315MHz frequency bands.| Part No. | CC1311P3 |
|---|---|
| Datasheet | CC1311P3 Download |
| Manufacturer |  Texas Instruments |
| Description | High-Performance Sub-1GHz Wireless MCU |
| Buy | Stock & Price |
FEATURES
Wireless microcontroller● Powerful 48MHz Arm® Cortex®-M4 processor
● 352KB flash program memory
● 32KB of ultra-low leakage SRAM
● 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
● Programmable radio includes support for 2- (G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
● Supports over-the-air upgrade (OTA) Low power consumption
● MCU consumption: – 2.63mA active mode, CoreMark® – 55μA/MHz running CoreMark – 0.7μA standby mode, RTC, 32KB RAM – 0.1μA shutdown mode, wake-up on pin
● Radio Consumption: – 5.4mA RX at 868MHz – 24.9mA TX at +14dBm at 868MHz – 65mA TX at +20dBm at 915MHz Wireless protocol support
● Mioty
● Wireless M-Bus
● SimpleLink™ TI 15.4-stack
● 6LoWPAN
● Proprietary systems High-performance radio
● -121dBm for 2.5kbps long-range mode
● -120dBm at 4.8kbps narrowband mode, 433MHz
● -118dBm at 9.6kbps narrowband mode, 868MHz
● -110dBm at 50kbps, 802.15.4, 868MHz
● Output power up to +20dBm with temperature compensation
● Down to 4kHz receiver filter bandwidth Regulatory compliance
● Designed for systems targeting compliance with these standards: – ETSI EN 300 220 Receiver Cat.
