Datasheet4U Logo Datasheet4U.com

CD74FCT374 - BiCMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

General Description

The CD74FCT374 is an octal, edge-triggered, D-type flip-flop that uses a small-geometry BiCMOS technology and

Key Features

  • 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The output stage is a combination of bipolar and CMOS transistors that limits the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V) reduces power-bus ringing [a source of electromagnetic interference (EMI)] and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CD74FCT2245T Fast CMOS Octal Bidirectional Transceivers Harris Semiconductor
CD74FCT245T Fast CMOS Octal Bidirectional Transceivers Harris Semiconductor
CD74FCT640T Fast CMOS Octal Bidirectional Transceivers Harris Semiconductor
CD7401 Speaker Turbosonic
CD746A ZENER DIODE Compensated Deuices

Other Datasheets by Texas Instruments

Part Number Description
CD74FCT373 BiCMOS OCTAL TRANSPARENT D-TYPE LATCH
CD74FCT240 BiCMOS OCTAL BUFFER/LINE DRIVER
CD74FCT244 BiCMOS OCTAL BUFFERS/LINE DRIVERS
CD74FCT244AT BiCMOS OCTAL BUFFERS/LINE DRIVERS
CD74FCT244E BiCMOS OCTAL BUFFERS/LINE DRIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CD74FCT374 BiCMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS SCBS739 – JULY 2000 D BiCMOS Technology With Low Quiescent Power D 3-State Outputs Drive Bus Lines Directly D Buffered Inputs D Noninverted Outputs D Input/Output Isolation From VCC D Controlled Output Edge Rates D 48-mA Output Sink Current D Output Voltage Swing Limited to 3.