Datasheet4U Logo Datasheet4U.com

CD74FCT574 - BiCMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

General Description

The CD74FCT574 is an octal, D-type, edge-triggered flip-flop that

Key Features

  • noninverted, 3-state outputs, designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. This device uses a small-geometry BiCMOS technology. The output stage is a combination of bipolar and CMOS transistors that limits the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V) reduces pow.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CD74FCT2245T Fast CMOS Octal Bidirectional Transceivers Harris Semiconductor
CD74FCT245T Fast CMOS Octal Bidirectional Transceivers Harris Semiconductor
CD74FCT640T Fast CMOS Octal Bidirectional Transceivers Harris Semiconductor
CD7401 Speaker Turbosonic
CD746A ZENER DIODE Compensated Deuices

Other Datasheets by Texas Instruments

Part Number Description
CD74FCT573AT BiCMOS OCTAL TRANSPARENT D-TYPE LATCH
CD74FCT540 BiCMOS OCTAL BUFFER/DRIVER
CD74FCT541 BiCMOS OCTAL BUFFER/DRIVER
CD74FCT543 BiCMOS OCTAL REGISTERED TRANSCEIVER
CD74FCT564 Octal D-Type Flip-Flops

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CD74FCT574 BiCMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS SCBS745 – JULY 2000 D BiCMOS Technology With Low Quiescent Power D Buffered Inputs D Noninverted Outputs D Input/Output Isolation From VCC D Controlled Output Edge Rates D 48-mA Output Sink Current D Output Voltage Swing Limited to 3.