CY54FCT373T Datasheet | Texas Instruments

description The ’FCT373T devices consist of eight latches with 3-state outputs for bus-organized applications. When the latch-enable (LE) input is high, the flip-flops appear transparent to the data. Data that meets the required setup times are latched when LE transitions from high to low. Data appears on the bus when the output-enable (OE) input is low. When OE is high, the bus output is in the high-impedance state. In this mode, data can be entered into the latches. These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 Copyright  2001, Texas Instruments Incorporated On products pliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. CY54FCT373T, CY74FCT373T 8-BIT LATCHES WITH 3-STATE OUTPUTS SCCS021B - MAY 1994 - REVISED OCTOBER 2001 ORDERING INFORMATION PACKAGE† SPEED (ns) ORDERABLE PART NUMBER TOP-SIDE MARKING QSOP - Q Tape and reel 4.7 CY74FCT373CTQCT FCT373C SOIC - SO Tube Tape and reel 4.7 CY74FCT373CTSOC FCT373C 4.7 CY74FCT373CTSOCT - 40°C to 85°C QSOP - Q SOIC - SO Tape and reel Tube Tape and reel 5.2 CY74FCT373ATQCT FCT373A 5.2 CY74FCT373ATSOC FCT373 5.2 CY74FCT373ATSOCT Tube 8 CY74FCT373TSOC SOIC -...