• Part: CY74FCT162H952T
  • Description: 16-Bit Registered Transceivers
  • Manufacturer: Texas Instruments
  • Size: 1.20 MB
Download CY74FCT162H952T Datasheet PDF
Texas Instruments
CY74FCT162H952T
CY74FCT162H952T is 16-Bit Registered Transceivers manufactured by Texas Instruments.
Features - Ioff supports partial-power-down mode operation - Edge-rate control circuitry for significantly improved noise characteristics - Typical output skew < 250 ps - ESD > 2000V - TSSOP (19.6-mil pitch) and SSOP (25-mil pitch) packages - Industrial temperature range of - 40˚C to +85˚C - VCC = 5V ± 10% CY74FCT16952T Features : - 64 m A sink current, 32 m A source current - Typical VOLP (ground bounce) <1.0V at VCC = 5V, TA = 25˚C CY74FCT162952T Features : - Balanced 24 m A output drivers - Reduced system switching noise - Typical VOLP (ground bounce) <0.6V at VCC = 5V, TA= 25˚C CY74FCT162H952T Features : - Bus hold retains last active state - Eliminates the need for external pull-up or pull-down resistors Logic Block Diagrams 1 CEBA 1 CLKBA 1 OEAB 1 CEAB 1 CLKAB 1 OEBA 1A1 C CE D C CE D 2 CEBA 2 CLKBA 2 OEAB 2 CEAB 2 CLKAB 2 OEBA 1B1 2A1 FCT16952- 1 TO 7 OTHER CHANNELS 16-Bit Registered Transceivers Functional Description These 16-bit registered transceivers are high-speed, low-power devices. 16-bit operation is achieved by connecting the control lines of the two 8-bit registered transceivers together. For data flow from bus A-to-B, CEAB must be LOW to allow data to be stored when CLKAB transitions from LOW-to-HIGH. The stored data will be present on the output when OEAB is LOW. Control of data from B-to-A is similar and is controlled by using the CEBA, CLKBA, and OEBA inputs. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The CY74FCT16952T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The CY74FCT162952T has 24-m A balanced output drivers with current-limiting resistors in the outputs. This reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162952T is ideal for driving transmission lines. The CY74FCT162H952T...