Texas Instruments DAC101S101-Q1
DAC101S101Q is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. The supply voltage for the DAC101S101 serves as its voltage reference, providing the widest possible output dynamic range.| Part No. | DAC101S101-Q1 |
|---|---|
| Datasheet | DAC101S101-Q1 Download |
| Manufacturer |  Texas Instruments |
| Description | RRO Digital-to-Analog Converter |
| Buy | Stock & Price |
FEATURES
●1● Ensured Monotonicity
● Low Power Operation
● Rail-to-Rail Voltage Output
● Power-on Reset to Zero Volts Output
● Wide Temperature Range of −40°C to +125°C
● Wide Power Supply Range of 2.7 V to 5.5 V
● Small Packages
● Power Down Feature
● Resolution 10 bits
● DNL +0.15, –0.05 LSB (typical)
● Output Settling Time 8 μs (typical)
● Zero Code Error 3.3 mV (typical)
● Full-Scale Error −0.06 %FS (typical)
● Power Consumption – Normal Mode, 0.63 mW (3.6 V) / 1.41 mW (5.5 V) typical – Power Down Mode, 0.14 μW (3.6 V) / 0.33 μW (5.5 V) typical 2
APPLICATIONS
● Battery-Powered Instruments● Digital Gain and Offset Adjustment
● Programmable Voltage & Current Sources
● Programmable Attenuators
● Automotive 3
DESCRIPTION
The DAC101S101 is a full-featured, general purpose 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7 V to 5.5 V supply and consumes just 175 µA of current at 3.6 Volts. Competitive devices are limited to 20 MHz clock rates at supply voltages in the 2.7 V to 3.6 V range.
