DAC121S101QML-SP
Overview
The DAC121S101QML-SP device is a full-featured, general-purpose, 12-bit voltage-output digital-toanalog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes just 177 µA of current at 3.6 V. The on-chip output amplifier allows rail-to-rail output swing and the threewire serial interface operates at clock rates up to 20 MHz over the specified supply voltage range and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
- 1 5962R07726 - Total Ionizing Dose 100 krad(Si) - Single Event Latch-up Immune 120 MeV-cm2/mg - Single Event Functional Interrupt Immune 120 MeV-cm2/mg (See Radiation Report)
- Ensured Monotonicity
- Low Power Operation
- Rail-to-Rail Voltage Output
- Power-On Reset to Zero Volts Output
- SYNC Interrupt Facility
- Wide Power Supply Range (2.7 V to 5.5 V)
- Small Packages
- Power-Down Feature
- Key Specifications - Resolution: 12 Bits - DNL: +0.21, -0.10 LSB (Typical) - Output Settling Time: 12.5 µs (Typical) - Zero Code Error: 2.1 mV (Typical) - Full-Scale Error: -0.04% FS (Typical) - Power Dissipation - Normal Mode: 0.52 mW (3.6 V) and 1.19 mW (5.5 V) Typical - Power-Down Mode: 0.014 µW (3.6 V) and 0.033 µW (5.5 V) Typical
