Datasheet4U Logo Datasheet4U.com

DLPA2000 - Power Management and LED/Lamp Driver

General Description

The DLPA2000 is a dedicated PMIC/RGB LED/lamp driver for the DLP2010 and DLP2010NIR digital micromirror devices (DMD) when used with a DLPC3430, DLPC3435, or DLPC150 digital controller.

For reliable operation of these chipsets, it is mandatory to use the DLPA2000.

Key Features

  • 1 High Efficiency RGB LED/Lamp Driver with BuckBoost DC-to-DC Converter, DMD Supplies, DPP Core Supply, 1.8-V Load Switch, and Measurement System in a Small Chip-Scale Package.
  • Three Low-Impedance (30 mΩ Typical at 27°C) MOSFET Switches for Channel Selection.
  • Independent, 10-Bit Current Control per Channel.
  • 750-mA Max LED Current for DLPA2000 Embedded.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DLPA004 DATA BUS TRANSIENT SUPPRESSOR Diodes
DLPA006 DATA BUS TRANSIENT SUPPRESSOR/THREE PHASE FULL WAVE BRIDGE RECTIFIER Diodes Incorporated
DLP-IO8-G USB-BASED 8-CHANNEL DATA ACQUISITION MODULE DLP Design
DLP05LC LOW CAPACITANCE UNIDIRECTIONAL TVS Diodes Incorporated
DLP0NSA150HL2 Chip Common Mode Choke Coil Murata

Other Datasheets by Texas Instruments

Part Number Description
DLPA2005 Power Management and LED/Lamp Driver
DLPA100 Power Management and Motor Driver
DLPA1000 Power Management and LED Driver
DLPA300 DLP Digital Micromirror Driver
DLPA3000 PMIC and High-Current LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community DLPA2000 DLPS043B – JUNE 2014 – REVISED FEBRUARY 2018 DLPA2000 Power Management and LED/Lamp Driver IC 1 Features •1 High Efficiency RGB LED/Lamp Driver with BuckBoost DC-to-DC Converter, DMD Supplies, DPP Core Supply, 1.8-V Load Switch, and Measurement System in a Small Chip-Scale Package • Three Low-Impedance (30 mΩ Typical at 27°C) MOSFET Switches for Channel Selection • Independent, 10-Bit Current Control per Channel • 750-mA Max LED Current for DLPA2000 Embedded Applications • On-Chip Motor Driver • DMD Regulators – Requires Only a Single Inductor – VOFS: 10 V – VBIAS: 18 V – VRST: –14 V – Passive Discharge to GND When Disabled • DPP 1.