DRV3203E-Q1 Datasheet | Texas Instruments

Features - 1 Qualified for Automotive Applications - AEC-Q100 Qualified with the Following Results: - Device Temperature Grade 0: - 40℃ to 150℃ Ambient Operating Temperature Range - Device HBM ESD Classification Level H2 - Device CDM ESD Classification Level C2 - 3-Phase Pre-Drivers for N-Channel MOS Field Effect Transistors (MOSFETs) - Pulse-Width Modulation (PWM) Frequency up to 20 k Hz - Fault Diagnostics - Charge Pump - Phase parators - Microcontroller (MCU) Reset Generator - Serial Port I/F (SPI) - Motor-Current Sense - 3.3-V Regulator - Low-Current Sleep Mode - Operation VB Range From 5.3 to 26.5 V - 48-Pin PHP 2 Applications - Automotive Motor-Control Applications - Oil Pump - Fuel Pump - Water Pump 3 Description The DRV3203E-Q1 device is a field-effect transistor (FET) pre-driver designed for three-phase motor control for applications such as an oil pump or a water pump. The device has three high-side pre-FET drivers and three low-side drivers which are under the control of an external MCU. A charge pump supplies the power for the high side, and there is no requirement for a bootstrap capacitor. For mutation, this integrated circuit (IC) sends a conditional motor signal and output to the MCU. Diagnostics provide undervoltage, overvoltage, overcurrent, overtemperature and power-bridge faults. One can measure the motor current using an integrated current-sense amplifier and parator in a battery mon-mode range, which allows the use of the motor current in a high-side current-sense application. External resistors set the gain. One can configure the pre-drivers and other internal settings through the SPI. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) HTQFP (48) 7.00 mm × 7.00 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. Typical Application Schematic 0.51 Ö VB VCFB 1 µF PNP...