DS15MB200 Datasheet | Texas Instruments

FEATURES - 2 1.5 Gbps Data Rate Per Channel - Configurable Off/On Pre-emphasis Drives Lossy Backplanes and Cables - LVDS/BLVDS/CML/LVPECL patible Inputs, LVDS patible Outputs - Low Output Skew and Jitter - On-chip 100Ω Input and Output Termination - 15 k V ESD Protection on LVDS Inputs/Outputs - Hot Plug Protection - Single 3.3V Supply - Industrial -40 to +85°C Temperature Range - 48-pin WQFN Package DESCRIPTION The DS15MB200 is a dual-port 2 to 1 multiplexer and 1 to 2 repeater/buffer. High-speed data paths and flow-through pinout minimize internal device jitter and simplify board layout, while pre-emphasis overes ISI jitter effects from lossy backplanes and cables. The differential inputs and outputs interface to LVDS or Bus LVDS signals such as those on Texas Instrument's 10-, 16-, and 18-bit Bus LVDS Ser Des, or to CML or LVPECL signals. The 3.3V supply, CMOS process, and robust I/O ensure high performance at low power over the entire industrial -40 to +85°C temperature range. Typical Application Switch Fabric A Switch Fabric B Backplane or Cable LVDS LVDS Mux Buffer FPGA or ASIC Figure 1. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005- 2013, Texas Instruments Incorporated SNLS196E - NOVEMBER 2005 - REVISED MARCH 2013 Block Diagram LI_0 PREL_0 ENL_0 LO_0 MUX_S0 PREA_0 ENA_0 PREB_0 ENB_0 SOA_0...