DS1691A Datasheet | Texas Instruments

FEATURES - 2 Dual RS-422 Line Driver with Mode Pin Low, or Quad RS-423 Line Driver with Mode Pin High - TRI-STATE Outputs in RS-422 Mode - Short Circuit Protection for Both Source and Sink Outputs - Outputs Will Not Clamp Line with Power Off or In TRI-STATE - 100Ω Transmission Line Drive Capability - Low ICC and IEE Power Consumption - RS-422: ICC = 9 m A/driver Typ - RS-423: ICC = 4.5 m A/driver Typ - I EE = 2.5 m A/driver Typ - Low Current PNP Inputs patible with TTL, MOS and CMOS - Pin patible with AM26LS30 DESCRIPTION The DS3691 is a low power Schottky TTL line driver designed to meet the requirements of EIA standards RS-422 and RS-423. It features 4 buffered outputs with high source and sink current capability with internal short circuit protection. A mode control input provides a choice of operation either as 4 singleended line drivers or 2 differential line drivers. A rise time control pin allows the use of an external capacitor to slow the rise time for suppression of near end crosstalk to other receivers in the cable. Rise time capacitors are primarily intended for waveshaping output signals in the single-ended driver mode. Multipoint applications in differential mode with waveshaping capacitors is not allowed. With the mode select pin low, the DS3691 are dualdifferential line drivers with TRI-STATE outputs. They feature ±10V output mon-mode range in TRISTATE mode and 0V output unbalance when operated with ±5V supply. Connection Diagrams With Mode Select LOW (RS-422 Connection) With Mode Select HIGH (RS-423 Connection) Figure 1. SOIC Package See Package Number D0016A Top View Figure 2. SOIC Package See Package Number D0016A Top View These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Please be aware that an important notice concerning availability, standard warranty, and use in critical...