Datasheet4U Logo Datasheet4U.com

DS90LV011A - 3V LVDS Single High Speed Differential Driver

General Description

The DS90LV011A is a single LVDS driver device optimized for high data rate and low power applications.

The DS90LV011A is a current mode driver allowing power dissipation to remain low even at high frequency.

In addition, the short circuit fault current is also minimized.

Key Features

  • 1.
  • 2 Conforms to TIA/EIA-644-A Standard.
  • >400Mbps (200MHz) Switching Rates.
  • 700 ps (100 ps Typical) Maximum Differential Skew.
  • 1.5 ns Maximum Propagation Delay.
  • Single 3.3V Power Supply.
  • ±350 mV Differential Signaling.
  • Power Off Protection (Outputs in TRI-STATE).
  • Pinout Simplifies PCB Layout.
  • Low Power Dissipation (23 mW @ 3.3V Typical).
  • SOT-23 5-Lead Package.
  • SOT-23 Version Pin Compatible with SN65.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS90LV011A 3V LVDS Single High Speed Differential Driver National Semiconductor
DS90LV012A 3V LVDS Single CMOS Differential Line Receiver National Semiconductor
DS90LV017 LVDS Single High Speed Differential Driver National Semiconductor
DS90LV017A LVDS Single High Speed Differential Driver National Semiconductor
DS90LV018A 3V LVDS Single CMOS Differential Line Receiver National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
DS90LV011AH High Temperature 3-V LVDS Differential Driver
DS90LV011AQ Automotive LVDS Differential Driver
DS90LV012A 3V LVDS Single CMOS Differential Line Receiver
DS90LV017A LVDS Single High Speed Differential Driver
DS90LV018A 3V LVDS Single CMOS Differential Line Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS90LV011A www.ti.com SNLS140C – MAY 2002 – REVISED APRIL 2013 DS90LV011A 3V LVDS Single High Speed Differential Driver Check for Samples: DS90LV011A FEATURES 1 •2 Conforms to TIA/EIA-644-A Standard • >400Mbps (200MHz) Switching Rates • 700 ps (100 ps Typical) Maximum Differential Skew • 1.5 ns Maximum Propagation Delay • Single 3.3V Power Supply • ±350 mV Differential Signaling • Power Off Protection (Outputs in TRI-STATE) • Pinout Simplifies PCB Layout • Low Power Dissipation (23 mW @ 3.